Built-Up and Channel Letters from Istanbul

Channel Letters from Istanbul

Channel letters from Istanbul

Amade Tabela manufactures custom channel letters in Istanbul for clients across Europe, the Middle East, and North Africa. Our factory has produced illuminated signage for over 18 years, supplying retail brands, franchise networks, architects, and sign companies in Germany, France, the Netherlands, the UK, Italy, Spain, and beyond.

A quotation lists the dimensions, materials, lighting direction and delivery country. Fabrication and freight are priced separately after the drawings are approved.

What Are Channel Letters?

Channel letters are individual three-dimensional letters or logos fabricated from aluminium, acrylic, or steel, with LED modules inside. Each letter is a hollow “channel” that contains the light source. They are the industry-standard signage solution for:

  • Retail storefronts and shopping mall facades
  • Hotel and restaurant exteriors
  • Office building entrance signs
  • Franchise and brand roll-outs across multiple locations
  • Supermarket and hypermarket signage

Types We Manufacture

Type Description Best For
Front-Lit LED illuminates the face only; face can be acrylic or open Retail, hospitality
Reverse Halo-Lit LED shines backward onto the wall; creates a halo effect Premium brands, luxury hotels
Front & Back Lit Illuminated both face and halo; maximum visibility High-traffic locations, 24h businesses
Open-Face Neon-Look LED flex strip mimics classic neon tube aesthetic Bars, restaurants, vintage branding
Non-Illuminated Powder-coated aluminium or brushed steel; no LED Indoor lobbies, directory signs

Materials & Technical Specifications

  • Letter body: 2–3 mm aluminium sheet (standard), 1.5–2 mm stainless steel (premium), or acrylic
  • Face: 3–5 mm coloured or frosted acrylic, or translucent vinyl on clear acrylic
  • LED modules: Samsung or Osram SMD 5050 (3000K–6500K), IP65 rated, ≥50,000 hours lifespan
  • Power supply: agree the input and output voltage, driver rating, location and product documentation in the specification.
  • Letter height: 5 cm to 200 cm (custom)
  • Colour rendering: CRI ≥90
  • Operating temp: −25°C to +55°C
  • Mounting: Raceway mount, direct wall mount, or standoffs included

Documentation for the destination market

Confirm the product specification and documentation required for the destination market before approving manufacture. Ask which component records and product documents are included in your written offer.

  • Low Voltage Directive 2014/35/EU
  • EMC Directive 2014/30/EU
  • RoHS Directive 2011/65/EU (no lead, mercury, or cadmium)

Confirm which test records and product declarations are included for the actual sign. The required documentation and local installation responsibilities should be agreed before production.

What the quotation covers

The written quotation lists dimensions, materials, lighting and the delivery country. Fabrication and freight are priced separately.

Tell us the destination postcode when you enquire. Packing, transport and any local charges are confirmed in the written offer, separate from production.

Prices are indicative ex-Istanbul. Shipping and installation are additional. Contact us for a formal quotation.

Shipping & Lead Times to Europe

  • Production time: confirmed in the quotation after artwork, materials and quantity are agreed.
  • Western Europe: freight route and estimated transit are confirmed for the actual consignment.
  • UK delivery: provide the postcode and confirm freight, clearance and delivery responsibilities in writing.
  • Scandinavia: delivery timing depends on the destination and agreed freight service.
  • Eastern Europe: request a destination-specific freight estimate.
  • Express freight: request availability and an estimated delivery date for the actual packed order.

Each shipment is securely crated and foam-protected. We provide full tracking, shipping documentation, and commercial invoice for customs.

Order Process

  1. Send your artwork — vector files (AI, EPS, PDF) or your brand guidelines
  2. Review the proposed construction, artwork and itemised quotation before approving production.
  3. Production begins — real-time photos during fabrication
  4. Quality check and shipping — agree the inspection records, packing and documentation before dispatch.
  5. Delivery + support — installation guide and remote assistance

Why Amade Tabela?

  • 18 years manufacturing experience, 3,000+ projects delivered
  • Own factory in Istanbul — no subcontracting
  • Dedicated EU export team, fluent in English, German, French, Dutch
  • Product documentation and export packing scope confirmed for the individual order.
  • Free design and 3D render service before commitment

Get a Free Quote for Channel Letters

Send your logo, letter height, quantity and delivery postcode to request a project-specific quotation.

Request a Quote →

WhatsApp: +90 532 554 48 39 | Email: bilgi@amadetabela.com

Why Choose Amade Tabela for Channel Letters in Istanbul?

  • ✅ from Istanbul — no middlemen, manufactured at our own facility in Istanbul
  • LED modules: agree the brand, outdoor rating, colour temperature and access for servicing in the specification.
  • ✅ 20+ years experience manufacturing channel letters for Turkish and European clients
  • ✅ 1,000+ channel letter projects completed across Istanbul (39 districts)
  • Aftercare and any warranty coverage: confirm scope, exclusions and duration in writing before ordering.
  • Urgent orders: ask whether your required production date is feasible before placing the order.
  • ✅ Export to Europe — DHL/FedEx shipping, full customs documentation

Channel Letters Istanbul — What the quotation covers

A quotation lists the dimensions, materials, lighting direction and delivery country. Fabrication and freight are priced separately after the drawings are approved.

Materials Available

  • Aluminium (standard): Lightweight, rust-proof, most common for front-lit channel letters
  • Stainless steel: Matt or mirror-polished, long lifespan, premium look
  • Gold / titanium chrome: Luxury finishes for hotels, banks, premium retail
  • Matt black: Trending minimalist aesthetic
  • Acrylic face colours: White, red, blue, custom RAL or Pantone matching

Frequently Asked Questions — Channel Letters Istanbul

What are channel letters?

Channel letters are individual three-dimensional letters manufactured from aluminium or stainless steel, typically illuminated with LED modules inside. Each letter is mounted separately on a building façade, creating a premium 3D sign effect. They are the most popular illuminated sign type for retail, hotels, and corporate buildings.

What does the quotation separate?

Fabrication and freight are priced separately. The offer names dimensions, materials, lighting and the delivery country.

Do you ship these signs abroad?

The signs are made in Istanbul and shipped to the country in the enquiry. Freight and documents are listed separately in the written offer.

How is the production time confirmed?

The written offer states the production time after the drawing and the quantity are approved. Transit is quoted with the freight.

What does the offer say about modules and certificates?

The offer names the LED modules, the supply voltage and the protection rating. Certificates that belong to that order are listed there.

Can you match Pantone or RAL colours?

Yes. We match any RAL or Pantone colour for acrylic faces and powder-coated finishes. Provide your brand colour code when ordering.

Do you offer installation in Istanbul?

Yes. For Istanbul clients we offer full installation service with our own crew. For international clients, signs are shipped flat-packed with full installation guides and hardware.

What is the warranty?

Request the written warranty and aftercare terms for the actual order, including component coverage, exclusions and replacement arrangements.

Order channel letters in Istanbul: +90 547 213 34 34 | bilgi@amadetabela.com

Amade Tabela

View Related Service →

Get a free quote: +90 547 213 34 34 | bilgi@amadetabela.com

Built-up letters and channel letters

Sign companies specify these as built-up letters or channel letters. Amade makes each letter in Istanbul. A fitter in the delivery country installs the set.

  • Face-lit: the acrylic face carries the light.
  • Halo-lit: the light falls back onto the wall.
  • Rim and return: a trim holds the face to the metal returns.
  • Rimless: the face has no visible trim cap.
  • Return depth and stand-off are taken from the drawing and named in the quotation.

What you send, and what the quotation confirms

You sendThe quotation states
Letter height, depth and face materialFront-lit or halo-lit channel letter. Face, returns and finish are named before production.
Where the driver sits, and how the sign is fixedFixing method and driver location, so the local fitter knows where the mains supply lands.
Delivery postcode, workshop or siteFabrication and freight are separate. Local fitting and any permit stay with the local contractor unless the offer includes them.

Request the quotation

How a channel letter is built

Every channel letter has the same anatomy. The face is the visible front, usually opal acrylic, acrylic with translucent vinyl, or metal. The return is the side wall that gives the letter its depth, made from powder-coated aluminium or stainless steel. The back closes the letter and carries the LED modules; on halo letters the back is clear or open so light escapes towards the wall. A trim cap or a flush-bonded edge joins face and return. Inside sit outdoor-rated LED modules and the power supply wiring.

LED modules, spacing and power supplies

Even light depends on three choices: the module type, the spacing between modules, and the distance between LEDs and face. A deeper return lets light spread before it reaches the face, which avoids visible hot spots. We place modules according to the stroke width of each character, use modules rated for outdoor use, and position power supplies where an electrician can reach them for service. Drain holes protect the inside from condensation.

Letter height and legibility

The right letter height depends on where people read the sign from: a reception wall is read from a few metres, a facade from across the street, a rooftop sign from a road or another building. The table below lists typical cap heights per location. We check the proportions on your facade drawing before production, so the sign is neither too small to read nor too large for the permitted sign area.

Mounting: stand-offs, rail or backer panel

Letters can be fixed individually to the wall on stand-offs, mounted on a common rail that hides cables and reduces wall penetrations, or assembled on a backer panel that installs as one unit. For every set we supply a 1:1 paper installation template with drilling points and cable entries marked, so installers in another country can mount without guesswork.

Quality checks before shipping

Each letter is lit and checked for even illumination before packing. We compare face and return colours with the approved RAL or brand reference, send photos or video of the lit set, and label every letter and every site. Spare power supplies can be added to the shipment so a failure never stops a store from opening.

What to specify for an accurate quotation

Send the letter height, the overall length, the illumination type, the face colour or film, the return finish, the mounting method and wall type, where the power supply should sit, the quantity per site and the delivery postcode. With these points a quotation can be compared line by line, and the production drawing confirms them in writing.

Channel letter types: construction compared

TypeFaceBackTypical return depthMounting
Front-litOpal or vinyl-covered acrylicClosed aluminiumapprox. 80–120 mmStand-offs, rail or backer
Halo-lit (reverse)Closed metal or painted faceClear or openapprox. 50–80 mm + 30–50 mm stand-offStand-offs only
Front + haloOpal acrylicClearapprox. 80–120 mmStand-offs
Side-lit / edge-litSolid faceClosedapprox. 50–100 mmStand-offs or rail
Unlit built-upMetal or acrylicClosedapprox. 20–50 mmStand-offs, pins or tape (interior)

Typical ranges for planning; the final depth follows the stroke width and size of each character on the production drawing.

Materials by component

ComponentOptionsNotes
FaceOpal acrylic, acrylic + translucent vinyl, aluminium, stainless steelVinyl allows exact brand colours on a white face
Return (side)Powder-coated aluminium, brushed or mirror stainless steelColour to RAL or brand reference
EdgeTrim cap or flush-bonded edgeFlush edge looks cleaner on premium facades
BackAluminium (front-lit), clear polycarbonate or open (halo)Halo backs need a clean wall surface
Light sourceOutdoor-rated LED modules, LED strip in narrow strokesColour temperature matched across all letters
PowerLow-voltage LED power suppliesPlaced for service access; spares available

Typical letter heights by location

LocationTypical cap heightComment
Reception or interior wall100–300 mmRead from a few metres; halo or unlit letters are common
Ground-floor shop front300–600 mmPedestrians and street traffic
Upper facade, street-facing600–1000 mmVisible across the street and from vehicles
Building top or roadside1000 mm and moreStructure and wind load assessed locally

Local sign regulations may limit the size; check the permitted sign area before ordering.

Mounting methods compared

MethodAdvantagesConsider
Individual stand-offsCleanest look, required for haloMore drilling, one cable entry per letter
Rail / racewayFewer wall penetrations, power supply inside the railRail stays visible; colour it to the facade
Backer panelPre-assembled, fast install, one connectionPanel becomes part of the design
Roof or frame structureLarge letters above the building lineStructural design by a local engineer

Channel letters: technical questions

How deep should channel letters be?

Front-lit letters typically have returns of about 80–120 mm so the light spreads evenly; halo letters are shallower and sit 30–50 mm off the wall. The production drawing fixes the depth for each character.

How far from the wall do halo letters sit?

Usually about 30–50 mm on stand-offs. The exact distance depends on letter size, wall colour and the halo effect you want; we confirm it on the drawing.

Can the LEDs be serviced later?

Yes. Power supplies are placed where they can be reached, and modules are fixed inside the letter so a technician can replace them if needed.

Do you supply an installation template?

Every set ships with a 1:1 paper template showing drilling points and cable entries, labelled per site.

Can you make logos and script fonts?

Yes. Logos, script fonts and curved shapes are made from your vector file; very thin strokes may be produced as solid or edge-lit parts.

Are the letters suitable for outdoor use?

Outdoor letters use outdoor-rated LED modules and power supplies, sealed construction and drain holes. Tell us if the site is coastal or very hot so we can specify accordingly.

Specifying channel letters for Europe and the Gulf

Front-lit, halo-lit or both

Front-lit channel letters give the best legibility at distance and suit high streets and retail parks. Halo-lit (reverse-lit) letters have closed metal faces and throw light onto the wall behind; they suit hotels, offices and premium retail. Combination letters light both the face and the wall. Tell us the viewing distance and the wall colour, because a halo effect depends on the surface behind the letter.

Letter height, return depth and stroke width

We confirm the cap height, the return depth and the minimum stroke width on the drawing before production. Thin strokes in decorative fonts may be too narrow for LED modules; we flag them and propose an adjustment rather than producing letters with dark spots.

Arabic and bilingual channel letters

For Saudi Arabia, the UAE, Qatar, Kuwait, Bahrain and Oman, many signs combine Arabic and English. Arabic is a connected script, so joins between letters, dots and diacritics are planned as separate pieces and fixing points. We agree the relative size of each language and the reading direction on the drawing.

Power supplies by destination

European installations use 230 V / 50 Hz. Saudi Arabia uses 230 V at 60 Hz; the other Gulf states use 230–240 V at 50 Hz. The power supply position (remote behind the wall or in a raceway) and cable exits are shown on the drawing so your electrician knows what to expect.

Delivery for your installer

Letters are packed with protected faces, numbered to match the layout drawing, and can be supplied with a full-size paper mounting template showing stud and cable positions. CE documentation is available for our illuminated products.

Related: Stainless steel letters · Illuminated shop signs · Arabic version

Send your drawings for a quotation · WhatsApp +90 532 554 48 39

⚡ Factory-Direct Sign Cost Optimizer & Raceway Quote

Select your sign tier, width, and destination voltage—get a direct Istanbul workshop quote with pre-wired raceway mounting.

📸 View 6 Real Photographed Case Studies →
Tüm Haberler Teklif Al
Amade Tabela sign project preview

İstanbul'un Tüm İlçelerinde Tabela Hizmeti →

International Export / Uluslararası Tabela İhracatı

🇬🇧 Sign Manufacturer Turkey (EN)🇩🇪 Schilderhersteller & Leuchtreklame (DE)🇫🇷 Fabricant d’Enseignes LED (FR)🇳🇱 Lichtreclame Fabrikant (NL)🇮🇹 Produttore Insegne LED (IT)🇪🇸 Fabricante de Rótulos LED (ES)🇵🇱 Producent Reklam Świetlnych (PL)🇸🇪 Skylttillverkare & Ljusreklam (SV)🇵🇹 Fabricante de Letreiros LED (PT)🇷🇺 Производитель Вывесок (RU)🇸🇦 مصنع لوحات إعلانية ولافتات (AR)🏭 Global B2B Trade Sign Supply